Free Motion Quilting – Part 4 – Begin FMQ

Free Motion Quilting – Part 4 – Begin Free Motion Quilting.

Once your quilt sandwich is prepared and smoothed to your satisfaction, it’s time to take it to the machine.  Here is the link to Part 3.

Free Motion Quilting Part 3 The Sandwich

Before I begin quilting, for every single project, I will do a test square.  I do this to refresh myself for quilting, to test the pattern I planned to use and the check the machine and thread.  Ensure that there is no tension on the upper thread as it unwinds from the spool.  It saves a lot of trouble in the long run. It’s way better to “iron” out any problems before beginning on the quilt proper.   Unpicking is tedious.

As I have mentioned previously, start with a small quilt project, like a Quiltlet, table topper or baby quilt.

Quick Kitchen Quiltlet and Tutorial

Consider the project you are making and the final purpose.  This method is ideal for quilts which are intended to be used.  Remember if your quilt is busy, has an overall patchwork design with little white space, the quilting will not be overwhelmingly visible.  In other words, you will need to decide whether to quilt an all over design, or quilt around particular shapes or use different designs in different  parts of the quilt.

Quilting Dahlias

image

Begin using a simple pattern like stippling or meandering to get into the swing of this technique.

Make sure you are sitting comfortably and have  your gloves and trimming scissors at hand.

It is not necessary to roll up the quilt.  It is more important not to have any tension on the quilt.  Only one small part of the quilt is being quilted at any one time, so that is the only part that technically needs to be smooth.  The rest of the quilt is draped or puddled loosely around.

Holiday Stars Quilt and Pattern

image

Begin at the centre of the quilt and work out in quadrants or part quadrants depending on the size of the quilt.  Put the needle down and turn the hand wheel to draw up the threads from under the quilt.

image

Put the presser foot down and  take a few stitches to secure the thread.  This is important to make sure that the bobbin thread is not quilted into the back of the quilt.  Do this each time you need to restart quilting.  Trim the excess thread.  Donn your gloves and begin quilting.  Move the quilt smoothly and with a consistent speed to achieve the design.  In order for the stitches to be as even as possible, the speed of the motor running ( or treadling)  would be as consistent as possible with the speed of the movement of the quilt under the needle.  Use your flat  gloved hands to move the quilt around.  If you begin to feel tension on the quilt or your arms and shoulders, stop.  Reposition the quilt so that once again it is free of tension then begin again.

image

Here I have just made a simple stipple design.  This can be as large or small as you like.

Once you have emptied a bobbin.  Stop.  Take the opportunity to get up and move around for a while before continuing  and also take the opportunity to check the back of your work to make sure there are no tucks or puckers.

The main message here is give it a go.  Once you have mastered a simple stippling design you can progress to more complex designs.  Practice will only improve your work.

3 thoughts on “Free Motion Quilting – Part 4 – Begin FMQ”

  1. Thanks for the tip. Brilliant. I already buy cheap gloves. Here in CT, Ocean State carries a brand I love, and cutting the tips off will make them perfect. I too hated taking them off and on again. Thanks.

  2. Thanks for sharing your talent of free motion quilting….you make it look so easy….as soon as I can I want to try it….I love flowers too so that’s what I will try…..thanks again….

Leave a Reply

Your email address will not be published. Required fields are marked *