Category Archives: Charm Square Stars – Free Pattern

Charm Square Stars “Anika’s Quilt” Free Pattern

imageLink to this Quilt Story Charm Square Stars “Anika’s Quilt”

When I made this quilt for my daughter her brief was purple.  That’s all.  This is what I came up with.

Please read all instructions before commencement.  All fabrics have been washed and lightly pressed before cutting.  The gingham I used for this quilt is all cotton but came from the dress fabrics department .  Therefore it is narrower than quilting cotton.

Finished quilt size approximately = 64″ square
Finished large block size  = 11″ square
Finished small block size = 6 1/2″ square
All seams based on 1/4 inch

Ingredients 

3 metres of white with yellow print fabric
1 metre of dark burgundy purple (for stars and binding)
1/2 metre of dark purple print
1  metre of lavender print (for the stars and outer border)
1/2 metre of lavender yellow print

6 metres of purple and white gingham for the cornerstones and borders and backing.  NB  Remember when cutting gingham, it is woven, rather than printed.  It may be easier to cut with scissors initially so that the checks line up.

Cutting

All the fabrics are cut from across the width of the fabric (WOF).
From the white with yellow print fabric
cut 3 1/2″ strips and cross cut into 64 x 3 1/2″ x 5″ rectangles
and 64 x 3 1/2″ x 3 1/2″ squares
Cut 2 1/2″ strips and cross cut 24 x 11″ strips

Cut 72 x 2 1/2″ squares

From each of the purple and lavender fabrics
Cut 4 x 5″x 5″ Charm Squares
Cut 32 x 3″ x 3″ squares

Cut 2 x 2 1/2′ x 2 1/2″ squares

From the purple and white gingham
Cut 77 x 2 1/2″ x 2 1/2″ squares

Cut 8 x 6 1/2″ x 15 1/2″ strips (cut these after the large and small star blocks   and quilt centre are completed, just so you can double check the measurements.)

From the burgundy purple 

Cut 7 x 2 1/2″ WOF strips for the binding

From the lavender purple

Cut 6 x 2 1/2″ WOF strips for the second border

 Construction of the quit centre
The star blocks are sewn together as a nine patch block once the star points are made.  To make the large star blocks use the the Foundation Triangles method.  Foundation Triangles Tutorial
Take a 5″ x 3 1/2″ white yellow rectangle.  place a 3″ purple square with the marked diagonal on one corner.  Sew across the line.
Fold fabric back to check placement.  Cut away the excess fabric from underneath leaving a 1/4″ seam allowance.
Repeat for the other corner with a matching purple square and cut away excess fabric.  Please keep all these cut triangles.  They will form the star points for the small star blocks.  (I’m calling this the Quilt Reabsorption Method).  Repeat with three more blocks in the same matching purple. image
Sew two of these blocks to each side of a matching 5″ Charm Square.
image
Add a 3 1/2″ white/yellow square to each side of the remainder 2 matching blocks.

image

Add the two completed strips to each side of the centre charm square strip.  Ensure the seams are well nested.  Pin to secure.  Sew.

Once the unit is constructed.  Press carefully.

image

Piece the remainder 15 blocks in the same manner until there are 16 blocks of 4 different colour ways.

Following the image, lay out the charm square stars  alternating light and dark star blocks.  Sash the star blocks together with the white/yellow 11′ x 2 1/2″ strips inserting a 2 1/2″ purple gingham square at the inside cornerstone joins.

image

Once the centre is completed, the next step is the make the small star blocks for the first border.

First Border

To make the first border you will need to construct 2 x 6 1/2″ star blocks of each colour on a yellow white background (8 altogether) and 8 x white / yellow stars on a purple and white gingham background.

See tutorial on Reabsorption Foundation Triangle Stars Tutorial.

Reabsorbtion Foundation Triangle Stars Tutorial

Once all the stars are completed, to begin the border, place a white/yellow star at the ends of one side.  place a coloured star in the centre.  The areas in between will have the gingham 6 1/2″ x 15 1/2″ strip.  Please check measurements carefully at this stage to be sure.  Then cut the strips to fit.  Sew the pieces together and check fit.  Sew this to one side of the quilt.  repeat for the opposite side.

image

For the two remaining sides sew a coloured star to a white/yellow star followed by the gingham strip another coloured star, a gingham strip, a white/ yellow star then a coloured star.  Sew this to one of the remainder sides of the quilt.  Repeat this step for the opposite side.

image

Second Border

Measure the finished size of the quilt through the centre.  Cut four matching lavender strips.  Sew a lavender 2 1/2″ strip, the length of the finished size to two opposite sides of the quilt.  Add a gingham cornerstone to the remainder two strips and then sew to the other two quilt sides.

For Anika’s Quilt I made an extra, small star block and used it in the centre of the quilt back.  Use the purple gingham to create the quilt back.

image

Prepare the quilt layers for quilting.

Quilt as desired.

Use the burgundy purple strips to make the binding.  Prepare Strips for Binding – Tutorial