Quick Bind Every Time Improved susies-scraps.com

Quick Bind Every Time Improved

Quick Bind Every Time Improved

Hello Dear Friends and Readers, and a warm welcome to todays post. When it comes to binding, I have to say I think it is easy to underestimate how much work is required to get the quilt finished. The binding needs to be nice and crisp, as even as possible and should feel full. One of the things I have noticed over the years is that after trimming the edges and applying the binding strip is that it can be tricky at times to avoid pesky little tucks, pleats or wavy stretching of the quilt edge occurring in the quilt top as the binding is applied. Also keeping the distance of the binding to the edge of the quilt can also be a little challenging and lead to unevenness of the fullness of the binding. I hope that makes sense. Previously I discussed binding in a quick method here Quick Bind Every Time – Tutorial. Today will be an update on that post ands hopefully an improvement. I have used this method on my last two big quilts with great success and hopefully you might find it helpful too.

Let’s get to it.

Requirements for Quick Bind Every Time Improved

A quilted top which has not been trimmed.

Binding strips sufficient to go all the way around the perimeter of the quilt in your preferred width. Today I am using 2 1/4” width strips.

Large sharp dressmaking scissors.

Method for Quick Bind Every Time Improved

Essentially the method remains unchanged except, the quilt will not be trimmed prior to adding the binding.

Quick Bind Every Time Improved susies-scraps.com

Beginning part way along one side and leaving a good 10 -12” tail of the binding strip, lay your binding strip along the edge of the quilt adjusting for any areas which might be uneven lay your strip as straight as possible and begin sewing 1/4” from the edge of the binding strip.

TIP

Be sure that your backing is nice and flat underneath. Check from time to time especially after changing direction.

Quick Bind Every Time Improved susies-scraps.com

Pivot at the corners as usual.

Quick Bind Every Time Improved susies-scraps.com
Quick Bind Every Time Improved susies-scraps.com

When the binding is complete, check the back to make sure there are no tucks.

Quick Bind Every Time Improved susies-scraps.com
Quick Bind Every Time Improved susies-scraps.com

Trim the Quilt Top

Take the whole quilt to a large flat area and using dressmaking scissors, very carefully trim the waste from the edges of the quilt top in line with the edge of the binding strip.

Turn the binding strip back and hand stitch in place. Here is the result. A nice firm full straight binding, without the struggle.

Quick Bind Every Time Improved susies-scraps.com
Quick Bind Every Time Improved susies-scraps.com

I hope you find this helpful. .

If you enjoyed this post, you may also like

Prepare binding strips for quilts – Tutorial

Bias Binding for Hexagon Quilt

Hand Sewing the Binding on a Quilt Tutorial

The Spinner Quilt – Part 3

Best wishes to everyone,

Susie

© Susan Stuklis 2023

6 thoughts on “Quick Bind Every Time Improved”

  1. I understand the instructions, but am not understanding the advantage to doing it this way versus trimming prior to sewing the binding.

    1. Thank you Carma.
      It is to avoid those pesky little tucks, pleats or wavy stretching of the quilt edge occurring in the quilt top as the binding is applied. In other words improvement of the stability of the quilt edge. Also keeping the distance of the binding to the edge of the quilt can also be a little challenging and lead to unevenness of the fullness of the binding.

    2. If done this way, the edges of the quilt will not be stretched and the quilt won’t have a wavy edge. It is a really good idea.

  2. I have been doing this for a long time , I find it works better for me. But I wasn’t trimming by hand, I use my rotary cutter and once I accidently cut the fold of a corner. After that I have been careful to fold the corner back when cutting. But I will try using scissors next time. Thanks for the hints.

  3. Thank you, I never thought to leave the quilt untrimmed before sewing the binding. I’ll be trying it 😊

Leave a Reply

Your email address will not be published. Required fields are marked *