Log Cabin Variation | susies-scraps.com

Christmas Pine Tree Half Log Cabin Block

Hello Dear Friends and Readers and a warm welcome to today’s post. For those of you who are new to susies-scraps.com I would encourage you to read the welcome. Welcome to susies-scraps.com. This is a happy blog and exists purely for the love of it. You will find it a relaxing place to come and browse or inspire your creativity . The site is advertisement free. No monies are generated from this blog.

It is not that long until Christmas and most of us feel some urgency to get organised for the big day! To that end, today’s post is a Christmas Pine Tree Half Log Cabin block which I hope you will all enjoy.

I would like to alleviate some recent confusion. It would appear that a post has been generated using the image from my Half/Quarter Log Cabin Block. To that end, people have been searching for a Christmas Tree Block on my site in relation to that post which used my image without my knowledge. (Just to be clear, I don’t know the origins of that post… Maybe it’s AI?) Here is the link to the Half/quarter log cabin block which I posted sometime ago.

Log Cabin Variation – Scrappy Half Log Cabin or Quarter Log Cabin Quilt Block Tutorial

So I have created this rather sweet block and I hope you will enjoy making one or some of these. Just one would make a nice hot pad, or a few could be a table runner or a bag. Or they would make a lovely Christmas quilt. It is up to you. A few embellishments could also be nice like buttons or big stitch quilting.

All seams based on 1/4″ except where expressed otherwise.

Block size 9″ x 9″.

Requirements for the Christmas Pine Tree Half Log Cabin Block

Two of green 2″ Width of Fabric Strips

One white or cream 2″ Width of Fabric Strip

(19 pieces in total)

One 3″ x 3″ brown square

From the green strip cut:

2″ x 1

4 ½” x 2

5″ x 1

6″ x 2

6 ½” x1

7 ½” x1

From the white strip cut:

2″ x 2

3″ x 1

3 ½” x 3

4 ½” x 2

5″ x2

Christmas Pine Tree Half Log Cabin Block susie's-scraps.com — Christmas Pine Tree Half Log Cabin Block susie’s-scraps.com

Making the Christmas Tree Trunk

Place a 2″ x 2″ white square, right sides together onto one corner of the 3″ x 3″ brown square. Sew diagonally down the 2 ” square using the drown line as your guide. Bear in mind, it can be a good idea to sew slightly one thread to the right so that when you trim the excess from the square, and fold it back, it will still be at 3″ x 3″.

Trim back to the seam to 1/4 of an inch. Press toward the corner. Do the same for the opposite corner. Press. This is now your tree trunk.

The Log Measurements for the Christmas Pine Tree Half Log Cabin Block

1 of 3″ x 2″

2 of 4 ½” x 2″

2 of 6″ x 2″

2 of 7 ½” x 2″

1 of 9′

Making the Logs for the Christmas Pine Tree Half Log Cabin Block

This step will require creating the branches of the pine tree by joining the green and white strips. Then each log will be added to the centre trunk block just like a Quarter Log Cabin. Log Cabin Variation – Scrappy Half Log Cabin or Quarter Log Cabin Quilt Block Tutorial

Please bear in mind that the angles of the branches will mirror each other so careful placement is needed.

The pieces will be connected as would be done for connecting binding strips.

Lay the green 2″ x 2″ square at the right hand end of the the 2″ x 3″ white strip. Sew on the diagonal, to cover the bottom right hand corner. Trim and fold back to form the first left bough.

First right bough. Lay a 3 ½” white strip atop of a 4 ½” green strip at right angles allowing approximately 3/8th of an inch overhang for each piece as would be done if joining binding strips. I have marked it to show the sewing line. Sew along the line. Trim excess. Press. Trim from the green end if necessary to 4 ½”.

Repeat this step to make the second left bough. This is what you should have so far.

Second Right Bough. Take a 6″ green strip and lay a 3 ½” white strip towards the right end as previously but with the white end hangin over the top. The stitching line will run from right to left and from top to bottom in a diagonal direction as marked. Trim the log from the green end if necessary to. make it 6″.

Third Left Bough. Take a 5 inch green strip and a 4 1/2 inch white strip. Lay the white. strip face down on the green strip again with the 3/8 inch overhang on each end, but with the white strip hanging down towards you. The seam will go from left to right and top to bottom diagonally as marked. trim off the excess from behind. Trim from the white end of this log if necessary to measure 6 inches in length.

Third Right Bough. Use the 6 1/2 inch green strip and lay a 4 1/2 inch white strip at the right end again with 3/8 of an inch overhang of each strip. The sewing line will go from right to left and top to bottom diagonal. Cut of excess from behind. Press and trim from the white end to 7 ½”

Fourth Left Bough. Take a 6″ Green and one 5″ white. Place the white Strip the at the Right end of the Green Strip with the white tail hanging down towards you. Sew together with the 3/8th of an inch overhang as previously. Sew diagonally. from left to right and top to bottom. Trim out from behind. Press and trim from the white end if necessary to measure 7 ½”.

I know we’re almost there!!!

Fourth Right Bough. This is the last one. Take the 7 ½” green and a 5″ white strip. Place the white strip at the right end of the Green strip with the excess towards the top and three eights of an inch overhang on each side of the strips. Sew diagonally from right to left and top to bottom. Trim. Press. This log should measure 9″.

All the logs are ready. if you have come this far, you are doing very well! Now for the easy bit.

Assemble the Christmas Pine Tree Half Log Cabin Block

Assemble the Log Cabin block commencing from the trunk block and the first left bough followed by the first right bough. Alternate sewing each bough until completed.