Quickstep Two Four Six Eight Block

Hello dear Friends and Readers and welcome to today’s post. Today I would like to share with you a simple block which will use your scraps and is super easy to prepare for.

This block it’s called Courthouse Steps. It’s one of my favourites. I have seen gorgeous antique examples of this quilt block which are so inspiring. It. will use any scraps and you will be able to quickly incorporate them into a quilt or table or bed runner. Whatever is your choice, no matter what the scraps.

I have designed this block so that all of the cutting will be very simple and the only thing you will need decide, is whether your fabric is light or dark.

Alternatively, you could be choosing a more specific colour way or it can be super scrappy to use up things you already have. Scrappy is my goal on this occasion.

I have noticed over the years that sometimes with Log Cabin and Courthouse Steps there can be a lot of different sizes of lengths of fabric to measure and cut which means it can be quite confusing. However, this block is incorporating minimal and very definite lengths which are easy to cut and that’s why I have called it the Quickstep Two Four Six Eight Block, because, these are the simple measurements that you will require to make this block. and it is so easy to remember!

Let’s get to it!

Block size 8″ x 8″

Seam allowance one quarter inch 1/4″

Requirements for the Quickstep Two Four Six Eight Block

Centre squares 2″ x 2″

Cut All Strips to 1 1/2″ width.

Light strips – two each of 2″ 4″ and 6″ lengths

Dark strips – two each of 4″ 6″ and 8″ lengths

Quickstep Two Four Six Eight Block susies-scraps.com

Making the Quickstep Two Four Six Eight Block

This is a good time to check your seam allowance.

If your strips are cut correctly and your seam allow is consistent at 1/4 inch your blocks will turn out very well. This saves needing to trim the blocks too much or even not at all!

To your 2″ Centre Square sew the 2″ x 1 1/2″ light strips to two opposite sides of the centre Square. This is a good opportunity to chain piece.

Finger or roller press the seam away from the Centre Square.

To the two other sides sew the two 4″ dark strips

Turn the block and sew the two 4″ light strips to the block.

The light strips should be stacked on each other and the dark strips should be stacked on each other..

Finger press as before, turn the block and now stitch the two 6″ dark strips to the dark side strips.

Turn the block and sew the 6″ light strips to the sides.

Finger press the seams and now add the two final 8″ darker strips to the dark side of the block. That’s it! Your block should be 8″ x 8″. Now a nice pressing with the iron and you’ll have a lovely block.

To put the blocks together, alternate the dark to light sides of the blocks as pictured here. Or you can stack them in the same direction which is what I think I will do.